NEC SL1000 Features And Specifications Manual page 791

ISSUE 2.0
For this fea-
Dial this Service Code...
ture...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Transfer
702 + Group number (1~8 or 01~32)
703 + Group number (1~8 or 01~32)
704 + Group number (1~8 or 01~32) +
705 + Group number (1~8 or 01~32)
706 + Group number (1~8 or 01~32)
707 + Group number (1~8 or 01~32)
708 + Group number (1~8 or 01~32)
884 + Extension number
Trunk Group Rout-
ing or Automatic
Route Selection
Trunk Queuing
Voice Mail
Voice Over
Features and Specifications Manual
1
833
834
835
mode + extension
882
0
*
8
754
# (Off-Hook)
5
(Off-Hook)
* 8
754
6 (Off-Hook)
When you ...
Set the Automatic Transfer for each
trunk line.
Cancel the Automatic Transfer for
each trunk line.
Set the Destination for Automatic
Trunk Transfer.
Set Automatic Transfer Setup for
each extension group.
Cancel Automatic Transfer Setup
Set the destination for Automatic
Transfer Setup for each extension
group.
Set Delayed Transfer for each ex-
tension group.
Cancel Delayed Transfer.
Set up DND for each extension
group.
Cancel DND for each extension
group.
Transfer a call into an existing call.
Transfer a call to the VRS. This can
be used also to route ANI/DNIS to
the VRS.
Place a call using Trunk Group
Routing or Automatic Route Selec-
tion.
Call your mailbox.
Enable Conversation Record at an
SLT.
Camp on to or leave a Callback at a
busy trunk.
Leave a message in a co-worker's
mailbox after callback their busy or
unanswered extension.
Call your mailbox.
Enable Conversation Record at an
SLT.
Send a Voice Over to a busy exten-
sion after hearing Busy/Ring tone.
SL1000/SL1100
Also see Note
Function
Key...
-
-
-
-
-
-
-
-
-
-
-
-
*
02
-
-
35
-
-
-
48 (SL1100)
2-13