Figure 1-33 Webpro End User Screen - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
P
Conditions
• When connecting via a dial up connection, a Dial Up Connection (PPP) must be configured in
Windows Network Connections.
• When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not
supported.
• The hardware/software requirements to run PCPro :
CPU
Memory
Operating System (OS)
Other
Communication Port
Disk Space
TCP Port
Screen Resolution
1-558

Figure 1-33 WebPro End User Screen

Item
Pentium® III 598 MHz (minimum)
Pentium 4 2.5 GHz (recommended)
128 MB of RAM, 256 MB (recommended)
Windows XP or Microsoft Vista
Windows 7 (32– and 64–bit)
Microsoft Internet Explorer 6.0 or higher
LAN or Modem
35 MB for PCPro (minimum)
TCP port 8000 must be open between the terminal and the host PC for
uploading/ downloading via LAN. PCPro/WebPro TCP port is set for
8000 at default, but can be changed via WebPro using PRG 90-38-02.
PRG 90-38-02 is not accessible from Telephone Programming or PCPro.
TCP port 5963 is required to be open if the Debug Terminal is going to
be used.
800 x 600 (minimum)
1024 x 760 (recommended)
ISSUE 2.0
Requirement
PC Programming