NEC SL1000 Features And Specifications Manual page 654

SL1000/SL1100
Program Num-
ber
10-12-09
10-12-10
10-20-01
S
10-46-01
15-05-27
15-05-28
15-07-01
30-01-01
30-02-01
30-03-01
84-20-02
84-20-03
84-22-01
84-22-02
1-644
Program Name
IP Address
Set or Verify IP for VOIPDB
Subnet Mask
Define the Media Gateway Subnet
External Equipment – TCP Port
Define the TCP port number for the LAN CTI and O&M com-
munication between the SL1100 and the Desktop Applications.
DR700 Server Information Setup – Register Mode
If set to 0, when the phone boots up it reports the ext. assigned
in the phone or chooses the next available extension in the
system. No password is required. If set 1 the SIP user name
and password must be entered on the actual IP phone. These
settings must match 84-22/15-05-27, or the phone does not
come on-line. If set to 2, when the phone boots up it prompts
user to enter a user ID and password before logging in. It
checks this user ID/password against 84-22/15-05-27. If there
is no match, the phone does not come on-line.
IP Telephone Terminal Basic Data Setup – Personal ID In-
dex
When the SIP Multiline telephone is using manual/auto regis-
tration, assign each phone a unique personal index. Then go to
command 84-22 to assign the user name and password.
IP Telephone Terminal Basic Data Setup – Addition Infor-
mation Setup
Set Talking Party to 0 for Desktop Application Softphone
Programmable Function Keys
Assign a function key to terminals
DSS Console Operating Mode
Set the DSS system Console mode.
DSS Console Extension Assignment – Extension Number
Set the extension number for the multiline terminal connected
with the DSS console (up to eight digits).
DSS Console Key Assignment
For DSS Console Chaining, assign a Speed Dialing Service
Code (or) plus a 2-digit bin number to a DSS Console key.
SIP Extension Basic Information Setup – Session Timer
Value
Define the periodic refresh time that allows both user agents
and proxies to determine if the SIP session is still active.
SIP Extension Basic Information Setup – Minimum Ses-
sion Timer Value
Define to convey the minimum allowed value for the SIP ses-
sion timer.
DR700 Multiline Logon Information Setup – User ID
Input the User ID for each Personal ID Index (1-128 (SL1000)
1-120 (SL1100)) when using auto or manual registration in
10-46-01.
DR700 Multiline Logon Information Setup – Password
Input the Password for each Personal ID Index (1-128
(SL1000) 1-120 (SL1100)) when using auto or manual registra-
tion in 10-46-01.
ISSUE 2.0
Default
172.16.0.10
255.255.0.0
External Device 1 (CTIServer) = 0
External Device 5 (SMDR Output) = 0
External Device 6 (DIMOutput) = 0
External Device 9 (1st Party CTI) = 8282
External Device
11 (O&M Server) = 8010 External De-
vice
12 (Traffic Report Output)= 0 External
Device
13 (Room Data Output for Hotel Serv-
ice ) = 0
(SL1100)
0
0
0
Refer to Programming Manual
0
No Setting
Refer to Programming Manual
180
180
No Setting
No Setting
SL Desktop Suite