Honeywell SmartLine SLN 700 Series User Manual page 38

4.20 Low DK
4.21 Dust or
Agitation
4.22 Echo
Lost Timeout
Page 30
When the LCD displays 4.20, press
adjustment setting menu. Display in LCD is as follows.
Low DK
Y
Distance
Press
Low DK
Y
N
Press key to select "Yes", used for the measuring setting when
DK value is low (<=2.1).. Display in LCD is as follows.
At this time, it is necessary to manually input an accurate empty tank
span value, which is used to determine the position of the tank bottom to
reduce the reflection of the tank bottom.
Low DK
Agitation state of material (liquid) Dust state of material (solid)
Device will send out failure signal after setting time if there's no echo
signal being received. Default setting is 300s.
SLN 700 SmartLine NCR Level Transmitter User's Manual
again to enter the DK value adjustment menu.
to enter the DK value
Revision 1