To Print A Full-Color Original In Two Colors - Toshiba e-STUDIO2010AC Imaging Manual

3.Printer-specific Adjustments
3.12.3

To Print a Full-Color Original in Two Colors

To adjust the boundary between black and colors other than black
Even if the text looks black on a monitor, it is not perfectly black but is in fact slightly colored. Therefore,
colored text sometimes appears in the black area when printing is performed in the Twin color mode. The
area to be printed in black can be extended by setting a larger value.
(1) Select [05 ADJUSTMENT MODE]. Change the values for codes [8213 to 8215] to adjust the
boundary between black and colors other than black.
• As the setting value is increased, the area of "CHANGE BLACK TO" will become larger. On the
other hand, if the value is decreased, the area of "SECOND COLOR" will become larger.
Apply to [05] code
Text 8213
Graphic 8214
Image 8215
 Caution after the adjustment
Nothing in particular.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Recommended value
Increase the setting value to
enlarge the black area.
3-98
Acceptable
Default
value range
8
1 to 255 1
1
© 2018 TOSHIBA TEC CORPORATION All rights reserved