To Improve Reproducibility Of Red Seal Color - Toshiba e-STUDIO2010AC Imaging Manual

2.Copier-specific Adjustments
2.23

To Improve Reproducibility of Red Seal Color

Before adjustment After adjustment
 Explanation
When an original containing a red seal is copied, users can select the Red Seal Color as the original
mode. Use this mode if the reproducibility of red seal color copied under the default copy settings is
insufficient.
 Procedures
(1) Select [08 SETTING MODE]. Change the value for code [7610] to "1".
(2) Press [Basic] tab on the Copy mode. Select "Red Seal Color" among the original modes.
After selecting "Red Seal Color", make a copy and check its image quality.
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-94