To Prevent Dark Toner From Coming Off - Toshiba e-STUDIO2010AC Imaging Manual

3.Printer-specific Adjustments
3.10

To Prevent Dark Toner from Coming Off

Before adjustment After adjustment
The dark toner comes off. The dark toner is securely fixed.
 Explanation
When highly colored lines, where a large accumulated amount of C, M, Y and K toners are used, are
created on raster data (image), such as BMP, GIF, JPEG and TIFF, and printed on the rough surface of
paper or thick paper, the toner may come off the paper. This is because the C, M, Y and K toners may be
overlaid, the paper may be extremely thick or the surface may be rough, and the amount of toner used
may be insufficient. Adjust the limit value of the maximum amount of toner used, in order to avoid a toner
fixing problem.
This adjustment does not affect a single color of C, M, Y and K, or bright colors such as red and green.
 Procedures
(1) Perform toner used amount adjustment.
For details of the adjustment procedure, refer to "3.1.9 Toner Used Amount Adjustment".
 Caution after the adjustment
Nothing in particular.
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-87