General Adjustments - Copying, Printing And E-Filing (Output From Box); To Obtain A Darker Image - Toshiba e-STUDIO2010AC Imaging Manual

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
1.1

To Obtain a Darker Image

Before adjustment
The output image looks light and blurred.
 Explanation
When an original containing photo images or gradational images is printed, the output image sometimes
looks light and blurred. Perform image quality control or automatic calibration, and adjust the transfer
roller bias output, in order to obtain a darker and sharper image.
 Procedures
• Perform the adjustment in accordance with the procedures below.
• Both the service technician and the user can perform procedure (1).
• Only the service technician must perform procedures (2) and (3).
(1) Perform automatic calibration to correct variations in image density.
A privilege to perform automatic calibration is set to Administrator by default but this can be changed
to the User.
For how to change the privilege, refer to the MFP Management Guide.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
After adjustment
The output image looks darker and sharper.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
1-1