To Register The Image Quality Adjusted Corresponding To A Preference (To Use The Custom Color Settings) - Toshiba e-STUDIO2010AC Imaging Manual

3.Printer-specific Adjustments
3.11 To Register the Image Quality Adjusted Corresponding to
a Preference (To use the Custom Color Settings)
 Explanation
The option to obtain the desired print image quality can be registered as Custom Color Settings.
• This adjustment will have an effect only on printing on a Windows PCL or PS or XPS emulation printer
driver. (This adjustment cannot be performed on a Mac printer driver.)
 Procedures
• Both the service technician and the user can perform all adjustments.
• As an example of using Customer Color Settings, if "Presentation" is selected as the base type from
among the "Image Quality Type" options, the procedure below is to set a larger value for the Middle
density of the color in the "Color Balance Details" option, and register the name of "Draft agenda".
PCL PS XPS
(1) Open the property page of the printer driver in the "Printers and Faxes" folder. Click [Setting] in the
"General" tab and open [Printing Preferences].
Ex:
Mark the "Detail" checkbox in the "Color Balance" tab. Click "Edit".
Set the value for the Middle density of the color in the "Color Balance Details" option.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-88