Cable Your Router - NETGEAR Nighthawk Pro XR1000 User Manual

Cable Your Router

Connect your router to a modem and power on your router.
Figure 7. Cable your router
To cable your router:
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
Note: If your Internet connection does not require a modem, connect your main
Ethernet cable to the yellow Internet port on the router.
3. Connect the power adapter to your router and connect the power adapter to a power
outlet.
4. Press the Power On/Off button on the back panel of the router.
The router's Power LED lights solid white when the router is ready.
Hardware Setup
Nighthawk Pro Gaming Router Model XR1000
18 User Manual