Change A Port Forwarding Service Or Application - NETGEAR Nighthawk Pro XR1000 User Manual

9. In the External Starting Port field, type the default port number for the service or
application.
10. In the External Ending Port, type the same port number, or, for each additional
computer that uses the service or application, increase the port number with one
digit.
For example, if you configure one computer to use a service or application using
port 26900 and you want to set up two additional computers, type 26902 in the field.
The port number for the first computer is 26900, for the second one it is 26901, and
for the third one it is 26902.
11. Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Type the port numbers in the Internal Starting Port and Internal Ending Port
fields.
12. In the Internal IP address field, type the IP address or select the radio button for an
attached device listed in the table.
13. Click the Apply button.
Your settings are saved. The service or application is added to the table on the Port
Forwarding page.

Change a Port Forwarding Service or Application

To change a port forwarding service or application:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Select Settings > Advanced Settings > Port Forwarding.
The Port Forwarding page displays.
5. In the table, select the radio button next to the name of the service or application.
6. Click the Edit Service button.
The Ports - Custom Services page displays.
Manage and Customize Internet
Traffic Rules for Ports
Nighthawk Pro Gaming Router Model XR1000
210 User Manual