Get Started PowerLINE adapters give you an alternative way to extend your network using your existing electrical wiring. Plug two or more PowerLINE adapters into electrical outlets to create a wired network connection. Use a PowerLINE WiFi access point to add a WiFi access point to your wired network.
Page 4
Meet Your Adapters Before you install your adapters, familiarize yourself with their LEDs, buttons, and ports. 1. Power LED 4. Ethernet port 7. WiFi LED 2. Ethernet LED 5. Factory Reset button 8. On/Of switch 3. Pick A Plug LED 6.
Page 5
Solid green. The electrical power is on. Power LED Solid amber. The adapter is in power saving mode (PL1000 only). Blinking green. The adapter is in the process of setting up security. Of. The adapter is not receiving electrical power. Ethernet LED Solid.
Page 6
Factory Reset Press the Factory Reset button for one second, and then button release it to return the PowerLINE adapter to its factory default settings. Ethernet port Connect your wired devices, including computers, WiFi routers and game consoles, to your PowerLINE network. Security button Use the Security button to create a secure PowerLINE network.
Page 7
Install Your Adapters Note: Do not plug your PowerLINE adapters into extension cords, power strips, or surge protectors. Room 1 Room 2...
Page 8
3. Use your computer, tablet, or smartphone to connect to your new PowerLINE WiFi network. The WiFi SSID and key are printed on the product label and is similar to Netgear##_EXT or Netgear##-5G_EXT. Congratulations. You installed your adapters and set up your network.
Page 9
Do More Ater your PowerLINE network is installed and running, you can use WPS to connect your access point, expand your network, customize the network settings, and customize security. Use WPS to Connect to Your Network ¾ To automatically connect to the PowerLINE access point using a WPS button: 1.
Page 10
Add Adapters To add adapters before you conigure the security feature, just plug them in and connect the adapters to your equipment. ¾ To add an adapter to a PowerLINE network with security set: 1. Plug the adapter into a wall outlet where you want to add Internet access.
Customize Your Network Settings The web browser setup guide helps you conigure the WiFi settings of the PowerLINE. ¾ To change your settings: 1. With your computer or WiFi device connected to your WiFi network, open a web browser. 2. Navigate to the following address: www.mywiiext.net. 3.
Page 12
Customize Your Network Security When you irst set up your network, the setup uses a default encryption key common to all PowerLINE adapters. You can change this. ¾ To create a private secure network: 1. Wait until the Pick A Plug LEDs are lit. 2.
Troubleshooting Tips Power LED is of. Make sure that power is supplied to the electrical outlet, and that the PowerLINE devices are not plugged into an extension cord, power strip, or surge protector. Power LED is amber. Power saving mode occurs when the Ethernet LED is of.
Page 14
Ethernet LED is of. • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Factory Reset button on each device for one second to return the PowerLINE adapter to its factory default settings.