NETGEAR Nighthawk Pro XR1000 User Manual page 65

8. To allocate upload bandwidth to devices, do the following in the Bandwidth Allocation
pane:
a. Above the graph, select the Upload radio button.
The Bandwidth Allocation pane shows as the Bandwidth Allocation - Upload
pane.
b. For each device to which you want to allocate upload bandwidth, move the
associated white circle to the bandwidth percentage that you want to allocate.
As you move the white circle, the download percentages in the white circles for
other devices change.
CAUTION: If you allocate 100 percent to one device, you effectively disable
other devices. If you allocate 0 percent to one device, you effectively disable that
device.
c. Click the UDATE DISTRIBUTION button.
The allocated upload bandwidths take effect.
9. To allocate an exact bandwidth (either in Mbps or in percentage) to a device, do the
following in the Bandwidth Allocation pane:
a. Above the graph, select either the Download radio button or Upload radio
button.
b. From the list of devices to the left of the graph, select the device.
If no devices display, click the + to the left of Devices.
A pane opens on the right side.
c. Do one of the following:
• In the Set Device Bandwidth field, enter the bandwidth in Mbps.
• In the Set Device Bandwidth field, use the up or down arrows to set the
bandwidth.
• In the circle graph, move the red band to the desired bandwidth percentage.
• In the field that shows the percentage, enter the desired bandwidth
percentage.
d. Click the SAVE button.
The allocated bandwidth takes effect.
Bandwidth that you allocate to this device also affects available bandwidth for
other devices.
e. To close the pane, click the X.
Optimize Gaming and
Customize Quality of Service
Settings
Nighthawk Pro Gaming Router Model XR1000
65 User Manual