Connect A Bluetooth Scanner; Unpair A Paired Scanner; Usb Troubleshooting - Honeywell Thor VM3A User Manual

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off

Connect a Bluetooth Scanner

To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing bar code with the Bluetooth scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. For Honeywell branded scanners tap Honeywell or for Intermec branded
5. Scan the Scan to connect barcode displayed on screen.
6. When the scanner is successfully paired with the computer, the scanner name

Unpair a Paired Scanner

You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. Tap Honeywell or Intermec.
5. Scan the Scan to disconnect barcode displayed on screen.

USB Troubleshooting

•
•
50
> Connected devices > Bluetooth.
scanners tap Intermec.
appears under Connected Device.
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
to toggle the Bluetooth radio On
.
and then tap Pair BT Scanner.
.
and then tap Disconnect BT Scanner.
Developer Information
Thor VM3A Vehicle-Mounted Computer
.
on page 69.
on page 18.