Connect To An Ethernet Network; How To Connect To Virtual Private Networks - Honeywell Thor VM3A User Manual

Connect to an Ethernet Network

To connect the computer to an Ethernet network.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Ethernet.
4. (Optional) To assign a static IP address.
5. Tap Save.

How to Connect to Virtual Private Networks

The computer supports connecting to virtual private networks (VPNs). This section
describes how to add and connect to VPNs. To configure VPN access, you must
obtain details from your network administrator. You view and change VPN settings
in the Settings app.
Note: Before you can add or connect to a VPN network, you must enable a screen lock
method.
Add a VPN
Before you can connect to a VPN, you must create a VPN profile.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Enter the required information for the VPN connection. If needed, swipe up on
5. Tap Save. The VPN name appears in the VPN list.
Connect to a VPN
Once a VPN profile is created, you can connect to the VPN at any time.
Thor VM3A Vehicle-Mounted Computer
> Network & Internet > Ethernet. The Ethernet setting is
turned On by default.
The Ethernet connection screen shows the current Ethernet connection. By
default, the computer assumes a DHCP connection, and that your network has
assigned an IP address automatically.
a. Tap DHCP and then select Static from the list.
b. Enter the required network information, and then tap Apply.
> Network & Internet > VPN.
to add a VPN new profile.
the screen to access all the required information fields.
45