Power Mode - Honeywell Thor VM3A User Manual

Power Mode

Select the desired power mode behavior.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Choose one of the following options:
4. Select Power Schedule for Sleep and Shutdown.
5. Tap Apply.
AC/DC
The computer is turned On and Off manually by the user using the power button on
the front of the device.
Ignition Control
The computer is turned On automatically when a signal is received via the Ignition
Input wire, which is part of the DC Power Cable.
Auto-On
The computer automatically powers up when power is provided. Auto-On is
recommended when the VM3A is powered by AC. The computer will automatically
power up after a power outage.
UPS
The computer is turned On or Off manually by the user using the power button on
the front of the device. The computer will shutdown automatically after one hour of
inactivity.
Power Schedule
Set the duration of time to put the VM3A into Sleep Mode or Shutdown.
Note: The device will sleep or shutdown after the timeout of inactivity.
Thor VM3A Vehicle-Mounted Computer
> Honeywell settings > Power Mode.
• AC/DC
• Ignition Control
• Auto-On
• UPS
13