Power On The Computer - Honeywell Thor VM3A User Manual

Power On the Computer

The dock has a power switch on the back. The "On" side of this rocker switch has a
raised bump to allow the state of the switch to be determined when the switch may
not be easily viewed, for example, after the dock is mounted in a vehicle.
After external power has been connected and the computer has been mounted in
the dock, press the side of the power switch with the raised bump to pass power
from the dock to the computer.
Next locate the Power button on the front of the VM3A.
Press the power button to turn the computer On. When the Welcome Screen is
displayed or an application begins, the power up sequence is complete.
After initial power On, the computer can be configured to automatically power On.
See
Thor VM3A Vehicle-Mounted Computer
P1 P2 P3 P4
P8 P9 P10
Power Management Modes
P5 P6 P7
P11 P12 P13 P14
for more information.
11