Honeywell Thor VM3A User Manual page 50

•
•
Network & Internet
Setting
Wi-Fi
Data usage
Hotspot &
tethering
Ethernet
VPN
Airplane mode
Connected devices
Setting
Bluetooth
Cast
NFC
Android Beam
Printing
USB
38
Tap a suggestion to open the settings screen or app relevant to the suggestion.
Tap the , and then Remove to dismiss the suggestion.
Description
• Turn Wi-Fi on or off.
• Lists available Wi-Fi networks in range and the connection status when
the radio is turned on.
• Add a network Wi-Fi connection.
• Tap Wi-Fi preferences to view saved networks, turn public network
notifications on or off, modify WLAN radio sleep settings, view MAC and IP
address information.
• Manage data usage.
• View Wi-Fi data use statistics for the current data use cycle.
• Turn network restrictions for metered WLAN networks on or off.
• Enable or disable USB tethering or Bluetooth tethering for sharing data
connections.
• Turn Ethernet connection on and off.
• Configure Ethernet connections and set up proxy settings when Ethernet
setting is turned on.
Set the password parameters for a virtual private network (VPN) connection.
Turn Airplane mode on or off.
Description
• Turn the Bluetooth radio on or off.
• Lists Bluetooth enabled devices in range when the radio is turned on.
• Connect to a Bluetooth Device.
• Enable wireless display.
• Connect to nearby devices.
• Turn Near Field Communication (NFC) on or off.
When the NFC radio is enabled, data exchanges are allowed when the
computer touches another NFC enabled device.
• Turn the Android Beam feature on or off.
When NFC is enabled, this feature is accessible. You can beam app
content to another NFC capable device by holding the devices close
together. The app determines what content is transmitted to the other
device.
Configure print options.
Configure USB connection.
Thor VM3A Vehicle-Mounted Computer