About Bluetooth Communications; Connect A Bluetooth Device - Honeywell Thor VM3A User Manual

4. Scroll to the bottom of the screen and tap Disable (for System certificates) or
5. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.

About Bluetooth Communications

Your computer is equipped to communicate with other devices using Bluetooth
technology. The Bluetooth radio must be turned on to discover, pair and connect to
other Bluetooth devices. System bar icons indicate Bluetooth radio status.

Connect a Bluetooth Device

To connect to a Bluetooth device, you must turn on the Bluetooth radio and then
select the device from a list of discovered devices.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off
4. Tap Pair New Device.
5. Select a device on the list to initiate a pairing request.
6. When the pairing request message appears:
48
Remove (for User certificates).
> Connected devices > Bluetooth.
• Verify the pairing PIN is the same on both device, and then tap Pair.
OR
• If the pairing request requires a PIN, enter the PIN, and then tap Pair.
When the device is successfully paired with the computer, the device name
appears under Paired devices.
to toggle the Bluetooth radio On
Thor VM3A Vehicle-Mounted Computer
.