Usb Keyboard/Mouse; Front Panel Leds - Honeywell Thor VM3A User Manual

4. Tap the Set Zoom Area button.
5. Select the desired zoom area by tapping on the upper left corner of the desired
Note: Be sure to select the desired area from the upper left corner to the lower right.
6. If the selected area is not satisfactory, repeat the step above to reselect an area.
7. To save, tap the check mark in the upper right corner.
Show Zoom Area
Tap the Show Zoom Area button to show the currently selected zoom area. The
selected area is highlighted in red.
When finished, tap the back button
Test Zoom Area
Tap the Test Zoom Area button.
•

USB Keyboard/Mouse

A standard USB keyboard or mouse can be attached to the computer using the
appropriate adapter cable.
The VM1052CABLE USB Y cable attaches to the dock and provides a type A USB
connector.

Front Panel LEDs

The keyboard LEDs are located near the specified key.
Blue Key LED
LED Behavior
Solid Blue
Off
Thor VM3A Vehicle-Mounted Computer
area and dragging to the lower right corner of the desired area. The selected
area is highlighted by a red outline.
Selecting the area from a different corner may result in nothing (a black box)
being displayed.
The zoom image is displayed.
.
Status
• Indicates the Blue Key modifier key is active. Blue Key mode is
invoked for the next keypress only.
• Pressing the Blue Key a second time exits this modifier mode
and turns off the LED.
Blue Key mode is not involved.
17