8.4.6.6 RAS menu: Event Register
Use this menu item to display the ON/OFF state of event registers (E coil) E0000 to E01FF.
(1) From the main menu, select RAS and then Event Register.
(2) The Event Register Monitor window appears.
Figure 8-99 Event Register Monitor window
(3) Click Start Monitoring to start monitoring the event registers. Event register monitoring starts and
the button changes to Stop Monitoring.
During monitoring, the on-screen elements in the Event Register Monitor window change colors to
reflect the state of the corresponding bit.
- When the bit is OFF: The corresponding element is displayed in white.
- When the bit is ON: The corresponding element is displayed in red.
(4) To stop monitoring the event registers, click Stop Monitoring. Event register monitoring stops and
the button changes to Start Monitoring.
(5) Click Close to close the Event Register Monitor window.
8-89
8. Tools