Connecting The Primary Battery; Figure 6-8 Primary Battery Connection Procedure - Hitachi S10VE User Manual

6.8 Connecting the primary battery

The following explains how to connect the primary battery of the S10VE CPU module.
You must connect the primary battery before mounting the CPU module to the mount base.
(1) Remove the primary battery cover from the left side of the CPU module by pulling on the tab.
(2) Securely insert the primary battery cables into the primary battery connectors, matching the colors of the
cables to those indicated on the CPU module PCB.
(3) Insert the tab of the primary battery cover into the slot on the CPU module.
(4) Press the primary battery cover until you hear a click.
Primary battery
Red cable
● Do not put the primary battery cables between the primary battery cover and the CPU module. Doing so
might result in shorting due to disconnection, causing deformation, leakage, heat generation, explosion,
or fire.
Black cable
Board
(4)
(1)

Figure 6-8 Primary battery connection procedure

Left side of CPU module
Primary battery
connectors
(3)
(2)
Red cable
Black cable
(黒) (赤)
WARNING
6-9
6. Installation
Cables for primary battery