8. Tools
Figure 8-36 Route Information window
Set the Setting Routes Num, Network Address, and Gateway IP Address values.
You can define a maximum of 32 routes.
After entering the information, click OK to return to the Set Network (ET.NET) window.
If you click Cancel, the settings you entered are discarded and you are returned to the Set Network
(ET.NET) window.
(4) To replace the network information on the PCs with the network information you set, click the Write
PCs button in the Set Network (ET.NET) window. The Option module parameter setup list window
appears.
Figure 8-37 Option module parameter setup list window
8-37