8. Tools
(4) To delete network information, select the network in Select Network whose information you want to
delete, and then click Delete. The displayed network information is cleared.
If you click the Write PCs button after clicking Delete, the network information set on the PCs is
deleted.
(5) To replace the network information on the PCs with the information you
set, click the Write PCs button.
After writing the information to the PCs, the system displays a message asking you to confirm that
you want to reset the PCs.
Click the OK button to reset the PCs.
If you click Cancel, the PCs are not reset.
If BASE SYSTEM successfully resets the PCs, it displays a message to that effect.
Figure 8-32 Reset confirmation message
Figure 8-33 Reset successful message
8-34