Pairing A Hommed Scale - Honeywell HomMed Genesis Touch Quick Start Manual
Hide thumbs
Also See for HomMed Genesis Touch:
- Patient instructions for use (27 pages) ,
- User manual (82 pages)
Table of Contents
Advertisement
Genesis Touch Quick Start
Pairing a HomMed Scale
Before you can use a HomMed Bluetooth scale, you need to pair it with the Genesis Touch monitor. Refer
to Configuring the Scale Type for more information.
To pair a HomMed scale:
1. Power up the HomMed scale by either inserting batteries or plugging the AC adapter into an electrical
outlet and into the scale connector under the scale handle.
2. From the General Settings screen, select Peripherals. The Peripherals screen appears:
3. Select Scale. The Scale screen appears and begins searching for all HomMed Bluetooth scales in the
area:
4. Compare the scale's serial number (located on the bottom of the scale) to those on the list and select
check box next to the scale that matches. One or more scale serial numbers appear:
22
P4810EN.01
©
2012 Honeywell HomMed. All rights reserved.
1/19/12
Advertisement
Table of Contents
