Honeywell HomMed Genesis Touch Quick Start Manual page 33

8. Press Yes. Messages appear on the screen:
9. Press the START button on the blood pressure unit. The cuff inflates and messages appear as blood
pressure is taken and the devices begin to pair.
Note: The blood pressure unit only tries to pair after a valid reading has been established on the unit.
10. Watch the messages on the screen. When the devices are paired, messages similar to the following
appear on the screen ending with "Pairing Succeeded":
1/19/12
©
2012 Honeywell HomMed. All rights reserved.
Setting Up Peripheral Devices
P4810EN.01 29