Honeywell HomMed Genesis Touch Quick Start Manual page 30

Genesis Touch Quick Start
8. Watch the messages on the screen. When the scale is paired, messages similar to the following appear
on the screen ending with "Pairing Succeeded!":
9.
If pairing is:
Successful
Not Successful
26 P4810EN.01
Then:
1. Press the back icon. The Peripherals screen appears with the serial number
of the scale that has been paired listed:
2. Go to the next peripheral device you want to configure.
Go to Pairing an A&D Scale and try again.
©
2012 Honeywell HomMed. All rights reserved. 1/19/12