Enabling Wi-Fi; Clearing An Existing Network - Honeywell HomMed Genesis Touch Quick Start Manual

Hide thumbs Also See for HomMed Genesis Touch:

Table of Contents

Enabling Wi-Fi

Enabling Wi‐Fi

The Genesis Touch is set to cellular communications when it is shipped from the factory. If the patient for

whom you are assigning the monitor will use the internet (Wi-Fi) for their communications, you must

enable Wi-Fi and connect to their network.

Clearing an Existing Network

If a monitor has previously been connected to a Wi-Fi network, we recommend that you remove (or clear)

that setting before attempting to connect to a new network.

To clear an existing network:

1. From the Vitals Now screen, select the settings icon.The Settings screen appears:

2. Select Advanced. The Enter Password screen appears:

1/19/12

P4810EN.01

Table of Contents