RIDGID MOB16000 Owner's Manual page 8

SP7012 Ridgid MOB16000 ESF.qxp_SP7012 12/20/16 3:33 PM Page 8
Drum/Base assembly (continued)
installing accessory holder
Attach the flexible end of the accessory
holder at the top of the Vac drum.
The non-elastic end should be located
at the bottom of the Vac drum.
Install accessory holder as shown with
the 4 screws included.
Tighten screws so that there is a small
clearance between the screw head and
the grommet on the accessory holder.
note: If no screw head to grommet
clearance, the accessory holder will
twist with the screws.
8
Flexible
End
Accessory
Holder
Accessory
Holder
Screw (4)
Non-Elastic
End