Drum/Base Assembly - RIDGID MOB16000 Owner's Manual

SP7012 Ridgid MOB16000 ESF.qxp_SP7012 12/20/16 3:33 PM Page 5
unpacking and checking carton
contents (continued)
Key Description
L Metal Handle................................1
M 8" Rear Wheels........................... 2
Bag of Loose Parts -
Containing the Following:
N 2" Casters....................................2
O Rear Axles...................................2
P 1/2" Cap Nuts.............................. 2
Q Wheel Caps.................................2
R Axle Retainers.............................2
S Screws, Type AB #10 x 3/4.........8
N

Drum/Base assembly

If any parts are missing or damaged
contact Customer Service.
Do not assemble until you have all the
parts.
1. Installing Cap Nut
a. Place one cap nut on end of each
axle.
b. Tap gently with hammer until fully
seated.
c. Place one wheel on each axle with
smooth portion of wheel facing the
cap nut.
Qty
P
O
5
L
Q
Axle (2)
Wheel (2)
Cap Nut (2)
Cap Nut
NOTE: Smooth
side of the wheel
to the outside.
M
R
S