Necessary Repairing Tools; Lubricant And Adhesive Application - Makita M1902 Technical Information

2 CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:
Wear gloves.
·
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what are the parts.
·
It is also recommended to have boxes ready to keep disassembled parts by group.
Handle the disassembled parts carefully. Clean and wash them properly.
·
3

NECESSARY REPAIRING TOOLS

Code No.
1R016 1/4" Hex shank bit M6
1R031 Bearing setting pipe 28-20.2
1R032 Bearing setting plate 8.2
1R034 Bearing setting plate 12.2
1R045 Gear extractor (large)
1R219 Torque wrench shaft 7-23N·m
1R220 Ratchet head 9.5
1R258 V Block
1R269 Bearing extractor (small)
4

LUBRICANT AND ADHESIVE APPLICATION

Apply the following lubricants and adhesives.
Lubricant
VG100
Description
Amount
a little
Sliding surface between Front base
and Main frame complete
3 / 19
Use for
removing M6x17 Hex socket hex bolt
assembling Armature and Drum
press-fitting Ball bearing 607ZZ/608ZZ
press-fitting Ball bearing 6000DDW
removing Armature and Drum
tightening M6x17 Hex socket hex bolt
assembling Armature and Drum
removing Ball bearing 6000DDW/607ZZ/608ZZ
Front base
Fig. 4-1