Ap Authentication And Encryption Options - Cisco 8961 Administration Manual

Unified communications manager 10.0 sip
Hide thumbs Also See for 8961:
Table of Contents

Advertisement

AP Authentication and Encryption Options

AP Authentication and Encryption Options
Authentication and encryption schemes are set up within the wireless LAN. VLANs are configured in the
network and on the APs and specify different combinations of authentication and encryption. An SSID
associates with a VLAN and the particular authentication and encryption scheme. In order for wireless client
devices to authenticate successfully, you must configure the same SSIDs with their authentication and encryption
schemes on the APs and on the Cisco Unified IP Phone.
Some authentication schemes require specific types of encryption. With Open authentication, you can use
static WEP for encryption for added security. But if you are using Shared Key authentication, you must set
static WEP for encryption, and you must configure a WEP key on the phone.
When you use Authenticated Key Management (AKM) for the Cisco Unified IP Phone, several choices for
both authentication and encryption can be set up on the APs with different SSIDs. When the phone attempts
to authenticate, it chooses the AP that advertises the authentication and encryption scheme that the phone can
support. Auto (AKM) mode can authenticate by using WPA, WPA2, WPA Pre-shared key, or CCKM.
Note
• When you use WPA pre-shared key or WPA2 pre-shared key, the pre-shared key must be statically
• When you use Auto (AKM), encryption options are automatically configured for WPA, WPA2,
• In AKM mode, the phone authenticates with LEAP if the phone is configured with WPA, WPA2,
• The Cisco Unified IP Phone does not support auto EAP negotiation; to use EAP-FAST mode, you
The following table provides a list of authentication and encryption schemes that are configured on the Cisco
Aironet APs that the Cisco Unified IP Phone supports. The table shows the network configuration option for
the phone that corresponds to the AP configuration.
Table 13: Authentication and Encryption Schemes
Cisco AP configuration
Authentication
Open
Open (Static WEP)
Shared key (Static WEP)
LEAP
802.1x
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
96
REVIEW DRAFT - CISCO CONFIDENTIAL
set on the phone. These keys must match the keys that are on the AP.
WPA Pre-shared key, WPA2 Pre-shared key, or CCKM.
or CCKM key management, or if 802.1x is used.
must specify it.
Key management
Common
encryption
None
WEP
WEP
Optional CCKM
WEP
VoIP Wireless Network
Cisco Unified IP Phone
configuration
Authentication
Open
Open+WEP
Shared+WEP
LEAP or Auto (AKM)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

99519971

Table of Contents