Honeywell Gamewell FCI ILI-MB-E3 Product Installation Document page 6

2.5.2 ILI-MB-E3 Installed to an E3 Series Mounting Plate Configuration
The ILI-MB-E3 can be installed in the following E3 Series cabinets and mounting plates.
E3 Series Cabinet C
• E3-INCC-C Plate
• E3-ILI-C Plate
• E3-INX-C Plate
1. Align and place the ILI-MB-E3 on top of the E3 Series mounting plate.
2. Insert eight standoffs (3/16" HEX x #4-40, x 1.25") into the eight-hole mounting pattern and secure the standoffs to the E3
Series mounting plate as shown in Location 1 of the figure below. (Note: PCA orientation).
Figure 2.5.2.1 illustrates the ILI-MB-E3 installed to the Cabinet C, E3-INCC-C Plate.
CABINET C,
E3-INCC-C PLATE
6
Figure 2.5.2.1 ILI-MB-E3 Installed to an E3 Series Mounting Plate
ILI-MB-E3 Product Installation Document — P/N 9000-0579:M7 07/02/2018
E3 Series Cabinet D
• E3-INCC-D Plate
• E3-INX-D Plate
1
1
STANDOFF,
3/16" HEX
(#4-40 x 1.25")
8 PLACES