Honeywell Gamewell FCI ILI-MB-E3 Product Installation Document page 2

1.1 Mass Notification System (MNS)
The Gamewell-FCI, Mass Notification System (MNS) is a Combination In-Building Fire and Mass Notification System. It
comprises the E3 Series Broadband Emergency Voice Evacuation and the E3 Series Broadband Networked Fire Alarm Systems.
This design allows a wide range of configurations to form an integrated, distributed fire alarm system in combination with the audio
evacuation for both Fire and Mass Notification functions as desired. The design also allows for its use as a dedicated standalone
Mass Notification System without the fire alarm service. The network communication conveys all Fire Alarm and Mass
Notification control functions, audio evacuation, voice paging, and fire fighter communications over a single pair of wires or fiber-
optic cable. The modular design offers several configurations to accommodate the following audio components:
• Autonomous Control Unit (ACU), (Main Command Center)
• Local Operating Console (LOC), (Remote Command Center)
• E3 Series Broadband Voice Evacuation System
Table 1.1.1 lists the E3 Series sub-assemblies that can be used in the Gamewell-FCI, MNS (Mass Notification System).
Autonomous Control Unit (ACU)
(Main Command Center)
AM-50 Series Amplifiers
ANU-48 (Remote Annunciator)
ASM-16 (Addressable Switch Module)
ILI-MB-E3
(Intelligent Loop Interface-Main Board)
ILI-S-E3 (Intelligent Loop Interface-
Expansion Board)
ILI95-MB-E3
(Intelligent Loop Interface-Main Board)
ILI95-S-E3 (Intelligent Loop Interface95-
Expansion Board)
INCC-MIC (Microphone)
INCC-TEL (Telephone)
INI-VG Series
(First/Second/Third Generation)
(Intelligent Network Interface Voice
Gateway)
NGA (Network Graphic Annunciator)
PM-9/PM-9G (Power Supply)
RPT-E3-UTP (Communication Circuit)
NOTE 1: In the E3 Series, Mass Notification System, the LCD-E3 and LCD-SLP Display panels are not used.
1.1.1 Mass Notification System - Documentation
The following MNS System information is available in the Gamewell-FCI, Mass Notification System (MNS) Installation/Operation
Manual, Part Number:LS10013-000GF-E.
• System Configurations
• Cabinets Installations
® and Velocit
®
E3 Series i a registered trademark and CAMWorks™ is a trademark of Honeywell International Inc.
®
UL is a registered trademark of Underwriters Laboratories, Inc.
©2018 Copyright by Honeywell International, Inc. All rights reserved.
2
E3 LOC Remote Command Center
AOM-TELF/AOM-2SF
ASM-16 (Addressable Switch Module)
INI-VG Series
(First/Second/Third Generation)
(Intelligent Network Interface Voice
Gateway)
INCC-MIC (Microphone)
NGA (Network Graphic Annunciator)
INCC-TEL (Telephone)
Table 1.1.1 E3 Series Modules Used in the MNS System
• Class 2 Power-Limited Requirements
• Wiring
ILI-MB-E3 Product Installation Document — P/N 9000-0579:M7 07/02/2018
E3 Broadband System
(Distributed System)
AM-50 Series Amplifiers
ANU-48 (Remote Annunciator)
ASM-16 (Addressable Switch Module)
ILI-MB-E3
(Intelligent Loop Interface-Main Board)
ILI-S-E3 (Intelligent Loop Interface-
Expansion Board)
ILI95-MB-E3
(Intelligent Loop Interface-Main Board)
ILI95-S-E3 (Intelligent Loop Interface95-
Expansion Board)
INCC-MIC (Microphone)
INCC-TEL (Telephone)
INI-VGC, (First/Second/Third Generation)
(Intelligent Network Interface Voice
Gateway)
INI-VGX, (First/Second/Third Generation)
(Intelligent Network Interface Voice
Gateway)
NGA (Network Graphic Annunciator)
PM-9/PM-9G (Power Supply)
RPT-E3-UTP (Communication Circuit)
• System Operation
• Testing/Maintenance