Controls & Components - Grizzly T31634 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Laser Switch LED Switch
Release Buttons
Figure 1. Handle controls.
Trigger Switch: Starts saw.
Release Button: Must be pressed before trigger
switch will engage.
Laser ON/OFF Switch: Activates laser sight to
project guide for cut on workpiece.
LED Work Lamp ON/OFF Switch: Activates light
to illuminate cutting area for better visibility.
-4-
manual BEFORE
Trigger Switch
Fence Extension
Lock
Workpiece Stop
Figure 2. Table and fence components.
Table Extension (1 of 2): Provides support for
long workpieces.
Table Extension Lock (1 of 2): Locks table
extension at desired length.
Fence Extension (1 of 2): Provides support for
long workpieces.
Fence Extension Lock (1 of 2): Locks fence
extension at desired length.
Workpiece Stop: Raises to quickly position stock
when cutting multiple pieces of equal length.
Bevel Release
Pin
Bevel Angle
Scale
Figure 3. Bevel components.
Bevel Lock Handle: Lifts to unlock tilt position.
Bevel Release Pin: Pulls out to allow bevel angle
adjustment.
Bevel Angle Scale: Indicates angle of bevel from
45˚ left - 45˚ right.
Model T31634/T31635 (Mfd. Since 8/19)
Fence Extension
Table Extension
Table Extension
Lock
Bevel Lock
Handle