Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–3 and the following descrip-
tions to become familiar with the basic controls of
this machine.
A. ON/STOP Switch: Turns motor ON when
pulled out; turns motor OFF when pressed in.
B. ON/STOP Switch Disabling Key: Disables
switch when yellow key is removed.
A
B
Figure 1. Location of ON/STOP switch.
-4-
manual
BEFORE
C. Handwheel Locks: Lock blade height
and angle when tightened (one on each
handwheel).
D. Blade Tilt Handwheel: Adjusts angle of
blade tilt from 90°–45°.
E. Blade Height Handwheel: Adjusts blade
height from 0"–3
⁄
1
8
C
E
Figure 2. Blade adjustment handwheels and
locks.
F.
Fence Lock Handle: Locks fence when
pushed down, unlocks fence when pulled up.
G. Fence: Guides workpiece as it moves into
blade and determines angle of cut. Fence
face can be positioned for standard cutting
operations, or placed in lower position for
blade guard clearance during narrow ripping
operations.
H. Fence Lock Knobs: Secure fence when
tightened; allow fence to be repositioned
along fence tube when loosened.
F
Figure 3. Location of fence controls.
Model G0899 (Mfd. Since 10/20)
".
D
G
H
Advertisement
Table of Contents
