Identification - Grizzly T31634 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Dust Bag
Bevel Controls
Base
For Your Own Safety Read Instruction Manual Before Operating Miter Saw
a) Wear eye protection.
b) Keep hands out of path of saw blade.
c) Do not operate saw without guards in place.
d) Do not perform any operation freehand.
e) Never reach around or in back of saw blade.
f) Turn off tool and wait for saw blade to stop before moving workpiece or changing settings.
g) Disconnect power (or unplug tool as applicable) before changing blade or servicing.
h) Only use saw blade diameter rated for saw.
i) Only use saw blade with RPM rating higher than no-load arbor speed of saw.
Model T31634/T31635 (Mfd. Since 8/19)

Identification

Table
Slide Bar
No Hand Zone
Label (1 of 2)
Adjustable
Foot
Miter Controls
Upper
Blade Guard
Laser Guide
Lower
Blade Guard
Table Insert
Blade
Fence
LED Work Light
Operating Handle
Motor
Combo Tool
Storage
Hold-Down
Clamp
-3-