Disassembling Control Arm (For Model Eb5300Wh) - Makita EB5300TH Repair Manual

4-4-3 Disassembling Control arm (for Model EB5300WH)

1
According to Fig. 39 and Fig. 40, remove Lead unit and Control cable.
Fig. 48
[2]
[1]
[3]
Fig. 49
[1] [4] [5]
Fig. 50
[1]
Fig. 51
[1]
[3]
[3]
[2]
[2]
23 / 71
2
Remove two 5x20 Tapping screws [1] to remove Arm
base section [2] from Frame [3].
3
Remove M6x25 Hex socket head bolt [1] to remove
Arm [2] and Arm base section [3]. In this step, Sleeve
7 [4] and Flat washer 12 [5] are also removed.
4
Using a slotted screwdriver, remove one of two Stop
rings E-4 [1].
5
Using long-nose pliers, pull off Rod 6 [1] from the
opposite side, and then remove Arm base [2] and Arm
base holder [3].