How To Use 1R181 Ignition Checker - Makita EB5300TH Repair Manual

4-5-10 How to use 1R181 Ignition checker


Do not remove Spark plug. (It is necessary to check that sparks are certainly generated by pulling Starter
rope even against the compressed air in Cylinder for normal use.)

The conventional method to check directly for spark, with Spark plug attached on the outside of Cylinder, is
uncertain and therefore prohibited.

Persons with a pacemaker should not use this checker.

Do not touch any terminal during use because dangerous high voltage is applied to each terminal.

Make sure that the terminals of 1R181 are
firmly tightened.

Do not overtighten Spark gap adjusting knob.
Terminals of 1R181
44 / 71