Adjusting The Control Lever Position - Makita GMP01 Instruction Manual

6. Clamp the control cable to the cable holders.
Fig.9
► 1. Cable holder 2. Control cable
NOTICE:
Make sure that the control cable is
securely fixed to the cable holder.
Adjusting the belt and shoulder
harness
1.
Put on the machine, then lock the buckle of the
waist belt, and then adjust the length of the waist belt.
Fig.10
► 1. Buckle
2
1
1
2. Adjust the length of the shoulder harness.
Fig.11
► 1. Shoulder harness

Adjusting the control lever position

Loosen the clamp screw. Move the control handle along
the swivel pipe to the most comfortable position, and
then tighten the clamp screw.
1
2
Fig.12
► 1. Control handle 2. Swivel pipe 3. Clamp screw
Attaching the diffusion cover
You can diffuse the mist by attaching the diffusion cover
to the end nozzle as shown in the figure.
Fig.13
► 1. Diffusion cover
10 ENGLISH
1
3
1