Advertisement
R
epair
<4> Adjusting hex nut M8 and hex bolt M8 x 55
Hex nut M8x13 has to be so adjusted and fastened that the base can be operated smoothly
without trembling.
Turn base
Base complete
<5> Assembling the parts for positive stop system in turn base. See Fig.10.
When lock pin is located in the groove of base complete, the lock pin has to protrude from
support plate by 2 - 3mm as illustrated in Fig.10A. This adjustment can be made by sliding
support plate within its elliptic hole.
Lock plate
Support plate
Tapping screw
bind M4x12
Fig.10
Hex nut M8x13
Flat washer 8
Hex bolt M8x55
Fig.9
Sliding area for adjustment
Lock pin
Compression
spring 7
Lock lever
Grip 32
Pin 3
Support plate
Support plate
Lock pin
Lock lever
Tapping screw
bind M4x12
Base
2 - 3mm
Fig.10A
P 5 / 9
Advertisement
