Makita BLS820SF Technical Information page 4

R
epair
<3> Assembling safety cover unit
[1] Insert the end of spiral spring 26 into the long hole of safety cover as illustrated in Fig.6.
Safety cover
[2] Assemble center washer adjusting its holes to the 4 bosses of safety cover after hitching
it with the another end of spiral spring 26, and assemble center cover as illustrated in Fig.7.
Safety cover
[3] Assemble center plate adjusting its 4 holes to 4 bosses of safety cover. Fasten safety cover
unit ( flat washer 5, safety cover, spiral spring 26, center washer, center cover and center
plate) with pan head screw M5x20 as illustrated in Fig.8.
Spiral spring 26
Flat washer 5
Pan head screw M5x20
Spiral spring 26
Fig.6
Center washer
Spiral spring 26
Fig.7
Safety cover
Fig.8
Center cover
Center plate
Center cover
Center washer
View from back side of safety cover
P 4 / 9
Small hole
of center cover