Cisco 8832 Manual page 8

Hide thumbs Also See for 8832:

Install the Wired Expansion Microphones

Procedure

Step 1

Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.

Step 2

Press Select when prompted to change the service mode.

Step 3

Enter the service domain and press Continue.

Step 4

Enter your username and password.

Step 5

Select Sign in.

Install the Wired Expansion Microphones

The phone supports an optional kit with two wired expansion microphones. You can extend the microphones

up to 7 feet (2.13m) from the phone. For best results, we recommend that you place the microphones at least

3 feet (0.91m) away from the phone.

Procedure

Step 1

Plug the end of the microphone cable into the port on the side of the phone.

Step 2

Extend the microphone cable to the desired position.

The following figure shows installation of a wired expansion microphone.

Figure 5: Wired Expansion Microphone Installation

8832nr