Cisco 8832 Manual page 6

Set Up Wi-Fi Client
Cisco IP Conference Phone 8832 Non-PoE
Ethernet Injector with the Ethernet power option
Figure 4: Wi-Fi Network Connection
Set Up Wi-Fi Client
The Cisco IP Conference Phone 8832 can access a Wi-Fi network. You need a power adapter to power the
phone. The Cisco IP Conference Phone 8832NR cannot be used with a Wi-Fi network.
Before you begin
Your administrator needs to configure settings on the call control system to enable Wi-Fi access.
Procedure
Step 1 If the phone is plugged into the Ethernet, unplug the Ethernet cable.
Step 2
Press Settings.
Step 3 Navigate to Admin settings > Network setup > Wi-Fi client setup.
Your Phone
6
Cisco IP Conference Phone 8832 Ethernet Injector with
the Ethernet power option
Your Phone