Cisco 8832 Manual page 7

Your Phone
Step 4
Navigate to Wireless and press On.
Step 5 Press Apply to save the changes, or press Revert to cancel the changes.
Step 6
Navigate to Network name.
Step 7 When the phone finishes scanning the SSID, choose a network to join.
Step 8 Enter your Wi-Fi credentials and press Connect.
Connect to a Preconfigured Wi-Fi Network
You can connect your Cisco IP Conference Phone 8832 to the network using Wi-Fi, but, for security, enter
your username and password. But, the Cisco IP Conference Phone 8832NR does not support Wi-Fi.
Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi
network or when your phone powers up.
You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.
Procedure
Step 1 Enter your Wi-Fi credentials when prompted.
Step 2
Select Sign-in.
Connect with Activation Code Onboarding
If your network has been configured to support this feature, then you can use Activation Code Onboarding
to connect to your company's phone network.
Enter an Activation Code
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.
Contact your administrator if you don't know your code or if you need a new one.
Procedure
Step 1 Enter your activation code on the activation screen.
Step 2 Press Submit.
Connect to Expressway
You can use Mobile and Remote Access Through Expressway to connect to your corporate network when
you are working away from your office.
Connect to a Preconfigured Wi-Fi Network
Your Phone
7