Product Specifications - AEG CFN90 Original Instructions Manual

fitting is used, the tool can remain charged with air
after disconnecting and thus will be able to drive
a fastener even after the air line is disconnected,
possibly causing injury.
■ Always disconnect air supply:
● before making adjustments
● when servicing the tool
● when clearing a jam
● when tool is not in use
● when moving to a different work area, as
accidental actuation may occur, possibly causing
injury.
LOADING TOOL
■ Do not load the tool with fasteners when any one
of the operating controls is activated.
■ When loading tool:
● Never place a hand or any part of body in
fastener discharge area of tool.
● Never point tool at anyone.
● Do not pull the trigger or depress the
workpiece contact as accidental actuation
may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS
■ Refer to them frequently and use them to instruct
others who may use this tool. If you loan someone
this tool, loan them these instructions also.
SYMBOL
Safety alert
Please read the instructions carefully before
starting the machine.
Wear ear protection
Wear eye protection
Keep hands away. Keep hands and body
away from the discharge area of the tool.
Hot surface. To reduce the risk of injury or
damage, avoid contact with any hot surface.

PRODUCT SPECIFICATIONS

Operating Pressure
Magazine Capacity
Air Consumption
3
4.8 - 8.3 bar (70 - 120 psi)
300 nails
8 L/cycle at 100 psi
Air Inlet
Weighted sound
impulse power level
Emission sound
pressure level
Vibration
Weight
DESCRIPTION
1. Quick-connect swivel connector
2. Rafter hook
3. Selectable trigger
4. Adjustable exhaust
5. Depth of drive adjustment
6. Toe-nailing claw
7. No-mar pad
8. Workpiece contact
9. Magazine
10. No-mar pad storage
11. Wire deflector
12. Air hose connector
13. Spool
14. Position 1
15. Position 2
16. Position 3
17. Position 4
18. Nail tray
19. Feeder cover latch
20. Feeder cover
21. Coil of nails
22. Nail chamber
23. Guides
24. Trigger lever pivot pin
25. Selector in position A
26. Selector in position B
27. Drive depth adjustment
28. To increase depth
29. To decrease depth
30. Hammer
31. Screwdriver
32. Pin
33. Bolt
34. Nut
35. Gasket
FEATURE
KNOW YOUR FRAMING COIL NAILER
See figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ADJUSTABLE EXHAUST
The exhaust can be adjusted to a variety of positions
depending on operator preference.
3/8 in. NPT
96.5 dB(A)
84.2 dB(A)
3.57 m/s
2
3.5 kg