Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Air leak near the top of the tool
or in the trigger area
Air leak near the bottom of the
tool
Tool does nothing or operates
sluggishly
Tool jams frequently
CAUSE
Loose screws
Worn or damaged O-rings or seals
Loose screws
Worn or damaged O-rings or bumper
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine or nose screws
Dirty magazine
Worn or damaged driver
POSSIBLE SOLUTION
Tighten screws
Install overhaul kit
Tighten screws
Install overhaul kit
Verify adequate air supply
Lubricate the tool
Install overhaul kit
Verify that fasteners are the correct size
Replace fasteners
Tighten screws
Clean magazine
Install driver maintenance kit
10
Hide quick links:
Advertisement
Table of Contents
