AEG CFN90 Original Instructions Manual page 9

DEPTH OF DRIVE ADJUSTMENT
The tool-free depth of drive adjustment lets you select
precise driving depth of the fastener.
EZ LOAD™ WITH OFFSET MAGAZINE
The EZ Load feature makes reloading quick and easy.
The offset magazine has three adjustment positions to
accept various nail sizes.
IN-HANDLE AIR FILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.
INTERNAL PISTON CATCH
The internal piston catch delivers consistent driving
power.
MUFFLER
The muffler reduces noise during operation.
NO-MAR PAD
The no-mar pad prevents marring and denting when
using the tool on softer woods.
QUICK-CONNECT SWIVEL CONNECTOR
The quick-connect swivel connector helps prevent hose
tangles.
RAFTER HOOK
The tool can be hung from a rafter when disconnected
and not in use.
SELECTABLE TRIGGER
The selectable trigger lets the operator choose between
contact actuation for higher productivity and single
sequential actuation for precise fastener placement.
TOE-NAILING CLAW
The toe-nailing claw reduces slipping during angled
nailing operations.
WIRE DEFLECTOR
The transparent wire deflector helps to prevent pieces of
wire from flying off the coil and toward the operator as the
nails are driven.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
■ Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged.
Use of a product that is not properly and completely
assembled could result in serious personal injury.
WARNING
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
PACKING LIST
● Framing coil nailer
● Tool bag
● Lubricant
● Hex key
● Eye protection
● Operator's manual
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
OPERATION
Do not use oxygen, combustible gases or bottled
gases as a power source for this tool. The tool will
explode and cause death or serious injury.
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
sufficient to inflict severe injury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could
result in objects being thrown into your eyes resulting
in possible serious injury.
Disconnect the tool from the air supply before leaving
the work area, moving the tool to another location, or
handing the tool to another person. Failure to do so
could result in serious personal injury.
WARNING
WARNING
DANGER
WARNING
WARNING
WARNING
4