AEG AFNDA2565 Original Instructions Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Nail Gun
  5. AFNDA2565
  6. Original instructions manual
AEG AFNDA2565 Original Instructions Manual

AEG AFNDA2565 Original Instructions Manual

Angled finish nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

AFNDA2565
ANGLED FINISH NAILER
ORIGINAL INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Manuals for AEG AFNDA2565

Summary of Contents for AEG AFNDA2565

  • Page 1 AFNDA2565 ANGLED FINISH NAILER ORIGINAL INSTRUCTIONS...
  • Page 2 Fig. 1 Fig. 2 Fig. 3...
  • Page 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9...
  • Page 4 Fig. 10 Fig. 11 Fig. 12...
  • Page 5 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.

  • Page 6: General Safety Warnings

    balance at all times. Proper footing and balance GENERAL SAFETY WARNINGS enables better control of the tool in unexpected situations. h. Use safety equipment. Always wear eye DANGER protection. Dust mask, nonskid safety shoes, READ AND UNDERSTAND TOOL LABELS AND hard hat, or hearing protection must be used for MANUAL.

  • Page 7: Operation

    injury. ■ Choice of triggering method is important. Check manual for triggering options. ■ Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. ■ Pneumatic tools are designed for single-hand They are NOT safety glasses. Following this rule will use.

  • Page 8: Product Specifications

    a fastener even after the air line is disconnected, Air inlet 3/8 in. NPT possibly causing injury. Weighted sound 92.9 dB(A) ■ Always disconnect air supply: impulse power level ● before making adjustments Emission sound 80.6 dB(A) ● when servicing the tool pressure level ●...
  • Page 9 DEPTH OF DRIVE ADJUSTMENT ● Hex keys (4 mm and 5 mm) ● Eye protection The tool-free depth of drive adjustment lets the operator select precise driving depth of the fastener. ● Operator’s manual IN-HANDLE AIR FILTER WARNING The self-cleaning in-handle air filter helps keep debris out If any parts are damaged or missing do not operate to extend the life of the tool.

  • Page 10: Preparing The Tool For Use

    APPLICATIONS WARNING You may use this tool for the purposes listed below: Disconnect the tool from the air supply before leaving ● Finish and trim (Interior and exterior) the work area, moving the tool to another location, or ● Door & window casing handing the tool to another person.
  • Page 11 WARNING WARNING Keep the tool pointed away from yourself and others The nailer will not function properly if the selector is when loading nails. Failure to do so could result in not securely seated in either position A or B. Always possible serious personal injury.

  • Page 12: Maintenance

    SETTING THE AIR PRESSURE from you while clearing the jam. 1. Remove fasteners from the tool. The amount of air pressure required will depend on the 2. Pull up on the latch and open the jam release. size of the nail and the workpiece material. 3.
  • Page 13 the tool to operate in the manner that best fits your CAUTION application. Load the proper fasteners for the desired Do not store tools in a cold weather environment to application. prevent frost or ice formation on the tools’ operating Note: Do not use this tool in the contact actuation valves and mechanisms that could cause tool failure.

  • Page 14: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE POSSIBLE SOLUTION Air leak near the top of the tool Loose screws Tighten screws or in the trigger area Worn or damaged O-rings or seals Install overhaul kit Air leak near the bottom of the Loose screws Tighten screws tool Worn or damaged O-rings or bumper...

Table of Contents