Technical Specification - AEG DVD 4520 HDMI Instruction Manual

11. Technical specifications
Signal system
Frequency Response
Signal-to–Noisy
Ratio(Audio)
Audio Distortion + Noise
Audio Output (Analog
audio)
Video Output
Max Resolution
Power Supply
Dimensions
Supported Disc
Accessories
REFERENCE:
To protect your DVD player, the interval between two consecutive Power button operations
must be above 30 seconds.
No using for a period of time, please pull out the plug from the electronic outlet.
The player should be operated only on condition that the type of power supply corresponds
to the marking label. Otherwise, it doesn't work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on again.
Appearance and function is subject to change without notice.
This device has been tested according to all relevant current CE guidelines, such as
electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
PAL/AUTO/NTSC
20HZ-20KHZ ( at 1KHz 0 dB)
≥90 dB ( at 1KHz 0 dB)
≤-60dB ( at 1KHz0dB)
+0
2.0 Vrms
-1..0
Composite: 1.0±0.2Vp-p
Load impedance: 75Ω, imbalance, negative polarity
720P/1080i
~220-230V 50Hz
430(mm) X 260(mm) X38(mm)
DVD/SVCD/VCD/CD/MP3/Kodak Picture/Photo CD
RCA Audio/Video cables (composite video and L-R audio)
Remote Control unit
User Manual
GB-29